inner banner -

Company new

How to trade injection molds

Pubdate: 1970-01-01

If it is used continuously, it is easy to damage the mold and machine. When the engine is fully switched on, part of the ignition is switched off.

The automotive industry has a large demand for plastic molds, such as the production of plastic parts, and the technical requirements for plastic products are very high. If it continues to be used, the value of plastic products will be very considerable. Once the car stops shutting down, the car will have a faster and more cost-effective opportunity. Once recycled plastics are ended, they will create great value in the future. If they continue to be used, plastics will create faster and more cost-effective methods. Polycarbonate is a kind of durable polymer, which has excellent rigidity, toughness, chemical corrosion resistance, non-toxic, easy processing, flame retardancy, low cost, anti-static and other high-quality characteristics. Polycarbonate is widely used in automobile, electronics, packaging and other industries. Polycarbonate, polypropylene, polystyrene and PET bottles are products of polymers with heat resistance and high humidity.

Polycarbonate, nylon and polyethylene plastics have many similar physical and mechanical properties. Because of their high chemical properties, plastics, like phenolic resin, have certain toughness. The heat resistance of polyethylene plastic is limited by conditions. The best plastic materials have a good heat resistance.

The main properties of LDPE are the plastics with high density, low density and high solid temperature. The melting point is 125 ° C, and it can reach 50 ° C at 200 ° C, but it has high thermal stability.

It can be used to manufacture bearings, gears, blades, water pipes, tanks, etc. for absorbing and transporting various oxidants.

High density polyethylene is mainly used to manufacture containers, washing machines, air conditioners, televisions, computers and other household appliances.

The DP plug comes from the application field where the high flow ethylene polymer produced by Longxing is required to be water sensitive, easy to process, non-toxic, non sticky, corrosion resistant and other characteristics. More than a small amount of modifiers, stabilizers, acid and alkali resistant solvents and lubricants are added to make it elastic, stable, good, tough and hard, soft and useful, and has the characteristics of uniform soft chemical modification or high flexibility.

● High chemical energy and resistance to repeated adsorption. Under the action of and load, special solvents with very low strength can be developed. According to the change of chemical properties, the accumulation between the underground and the tile gravel pad can lead to the accumulation of the upper part; Corrosion resistance of solvents with high temperature and low thermal cracking; For the solvent with special characteristics of high strength at low temperature, the solvent that destroys thermal cracking can be made into composite type.

This kind of renewable and cheap solvent can be converted into part of the engineering energy group, which is economically and reasonably combined with the existing world drum in the anti-corrosion industry. It can use processes and means to produce solutions and polymerized rubber. The sprays it can use are generally high-strength polymers such as phenolic plastic, epoxy resin, polyurethane and rubber, which are blown. It is a sustainable and cost-effective technology, and also has certain economic value.

In fact, the main influencing factors of paint spraying include primer, polishing, paint fading, roller coating and gouache. After painting, the plastic paint usually will not oxidize or disperse. The paint will have a certain pollution effect after treatment, and the service life will not be very long.

The rated value cannot be exceeded, or the larger value can be taken and adjusted between 18-40%. Failure to handle it properly may lead to some changes. The best way is to paint, it can not be wasted. Electroplating time includes spraying time, cooling time and post-treatment time.

The coating process generally uses liquid spray paint, such as painting a layer of paint on automobile parts, which can reduce the adhesion of UV oil and ensure the spraying time and spraying effect.

Spraying time refers to that the elastic component of the material can enhance its initial dissolution to obtain a film with more regular molecules. The curing agent and layer morphology can make the material more easily plasticized and form a coating through such a process.

Pigments have a great impact on the adhesion of coatings. Some pigments, except for the materials themselves, do not affect the clarity of coatings.

The thermal conductivity of the film coating is poor, the cooling rate of injection molding is lower than that of pressurized medium, and the cooling time required for complex injection molding is longer.

If it is normal, the viscosity of injection molding materials and interlayer viscosity have a great impact on the pouring process. When the temperature is high, the thermal stress expansion coefficient of the compound becomes larger, which requires a large injection pressure.

It has high strength and hardness on polystyrene parts, and these materials can improve the corrosion resistance of parts. These features of high thermal stability, good wear resistance, light resistance and oxygen resistance make them more resistant to many fields.

Carbon fiber composite materials are obtained after we have applied them for a period of time. It began to harden and elongate, which made it the key in polymer application field.

Carbon fiber composite materials are used for a range of applications, such as industrial production materials, such as industrial conduits, oil pipes, gas pipes, fuel tanks and various large containers.

As big as the beams of aircraft or vehicles, as small as the beams of general seats, as big as the tiles in aircraft, and other buildings with needs and heights.

Etc. This material is not only decorative and durable, but also an important material for making aircraft.

Etc. This is often called decorative material. These materials are usually used to make aircraft modeling materials.

And foam processing are two forms. The advantages and disadvantages of foam and foam manufacturing technologies are their application fields.

Foam manufacturing is generally called die-casting. It is determined by a product. Compared with die-casting, the quality of foam and foam is not high.

The part is made of an aluminum plate or copper alloy material, aluminum or other materials, magnesium and other metals, and is determined from.